Cricket speed gun

Bowling Speed Meter: How Fast Do You Bowl?

No radar gun? Film one delivery on your phone, step through the video frame by frame, mark the release and the moment the ball reaches the batter, and see your bowling speed in km/h. Works for nets, gully cricket and matches.

Choose a video
Speed (km/h)
-
Speed (mph)
-
Release (est.)
-
Flight time
-

Your video stays on your phone. Nothing is uploaded.

How to measure your bowling speed with a phone

  1. Film from side-on. Stand or prop the phone level with the middle of the pitch, far enough back to see both the bowler's hand and the batter in the same shot. Keep the phone still: a tripod or a friend with a steady hand helps.
  2. Use slow motion if you can. A higher frame rate means a more precise result. 120 or 240 fps slow motion is ideal, 60 fps is good, and 30 fps works but is less exact.
  3. Load the video with the box above. It is read by your browser only, so it never leaves your phone.
  4. Find the release. Use the frame buttons to stop on the frame where the ball leaves the bowler's hand, then press Mark release.
  5. Find the arrival. Step forward to the frame where the ball reaches the batter's crease (or hits the bat or pads) and press Mark at batter.
  6. Check the settings. Pick the distance, and tell the tool whether the video plays in real time or slowed down. Your speed appears straight away.

Which distance should I pick?

A full cricket pitch is 22 yards (20.12 metres) from stumps to stumps. A bowler lets go of the ball close to the popping crease, about 1.22 metres in front of their stumps, and the ball reaches the batter at roughly the other popping crease. That makes the usual release-to-batter distance about 17.7 metres, which is the default. For a shorter tennis-ball or gully cricket pitch, measure the gap between where the bowler releases and where the batter stands, and use a custom distance.

How accurate is it?

The result is the average speed of the ball over its flight: distance divided by time. The main source of error is the frame rate. At 30 fps each frame is a thirtieth of a second, and a ball bowled at 120 km/h takes only about half a second to reach the batter, so being one frame out changes the answer by around 7%. At 240 fps the same mistake costs under 1%.

TV speed guns measure the ball at the moment of release, when it is fastest. The ball slows down through the air and loses more speed when it bounces, so its average speed over the whole flight is lower. That is why the tool also shows a rough release speed estimate, about 10% above the average. Treat that number as a guide rather than a radar reading.

Slow-motion videos: real time or slowed?

Phones save slow motion in different ways. Some keep the video at full speed in the file and slow it only in the gallery app, so in your browser it plays in real time: choose Real time. Others save a stretched video that plays slowly everywhere: choose the slow-down factor, which is usually 4x for 120 fps and 8x for 240 fps. If you are not sure, film a quick clip of someone clapping twice one second apart and see how far apart the claps are in the video.

How fast do bowlers bowl?

Bowler typeTypical speed
Spin bowlers70 to 95 km/h
Club and school medium pace95 to 115 km/h
Fast club and academy bowlers115 to 130 km/h
International medium-fast130 to 140 km/h
International fast140 to 150 km/h
Express pace150 km/h and above

The fastest delivery ever recorded in international cricket is Shoaib Akhtar's 161.3 km/h at the 2003 World Cup. Read the full list in our guide to the fastest balls in cricket history.

Advertisement

Bowling speed meter: frequently asked questions

How can I check my bowling speed without a speed gun?

Film the delivery side-on, ideally in slow motion, then mark the release frame and the frame where the ball reaches the batter. The bowling speed meter divides the distance by the time between those frames.

Is this as accurate as a radar gun?

Not quite. It measures the average speed over the ball's flight, which is lower than the release speed a radar shows. With 120 or 240 fps video and careful marking it is usually within a few km/h of the average speed.

What frame rate should I use?

As high as your phone allows. 240 fps slow motion gives the most precise result, 60 fps is good, and 30 fps works but each frame can shift the answer by several km/h.

Does my video get uploaded?

No. The video is opened by your browser on your own phone and is never sent anywhere.

What distance should I use for gully cricket?

Measure from where the bowler lets go of the ball to where the batter stands, and enter it as a custom distance in metres. Walking it in big steps of about one metre each is close enough for a quick check.

What is a good bowling speed?

Club fast bowlers usually bowl 115 to 130 km/h. International fast bowlers bowl around 140 to 150 km/h, and only a handful have passed 160 km/h.

Advertisement