Sitting on a Vande Bharat Express and wondering how fast it is really going? Tap Start GPS and watch the live speed in km/h, plus the top speed and average for your trip. Free, in your browser, no app needed.
Tap Start GPS and allow location access
Open this page on your phone once you are on board, tap Start GPS and allow location access. The gauge shows the current speed of your Vande Bharat in km/h, updated every second. The Peak box keeps the highest speed reached, so at the end of the journey you know exactly how fast the train got.
| Figure | Speed |
|---|---|
| Design speed of the trainset | 180 km/h |
| Highest speed allowed in passenger service | 160 km/h, on a few upgraded sections |
| Usual top speed on most routes | 110 to 130 km/h |
| Typical average over a whole journey | 60 to 95 km/h |
The train itself can go faster than the track allows. Most of the Indian network is cleared for 110 or 130 km/h, and the train slows for stations, curves, junctions, bridges and busy approaches to big cities. That is why a Vande Bharat can touch 130 km/h and still average around 80 km/h for the trip. Your Average box shows the real figure for your journey.
On a different train today? Use the general train speed test, or see how fast a bullet train goes.
Tap Start GPS, allow location, and keep the phone near the window. Within a few seconds you will see the live speed of your Vande Bharat Express. Leave the page open and it records the top speed, the average speed and the distance covered.
Vande Bharat is a self-propelled train set. Instead of one locomotive pulling the coaches, motors are spread along the train, so it speeds up and slows down much quicker than a loco-hauled express. That quick acceleration is where most of the time saving comes from, more than the top speed. Watch the gauge as the train leaves a station: it reaches 100 km/h far sooner than an ordinary Mail or Express train.
Vande Bharat coaches have large windows, which helps. Sit by a window if you can, or hold the phone close to the glass. Readings can drop out for a moment in tunnels, deep cuttings and under station roofs, and come back on their own. You do not need mobile data after the page has loaded, as explained in does GPS work on trains?
When the journey ends, tap Stop and note the Peak and Average. Comparing them between routes is a good way to see which Vande Bharat services run on faster track.
The train set is designed for 180 km/h and has reached that in trials. In passenger service the highest permitted speed is 160 km/h, and only on a few upgraded sections. On most routes the train runs at up to 110 or 130 km/h.
Open this page on your phone, tap Start GPS and allow location access. The gauge shows the live speed in km/h, and the Peak and Average boxes record your trip.
Track limits, station stops, curves and slow zones near cities keep the average well below the top speed. The train accelerates quickly, but it cannot run at full speed for long on most routes.
Yes. GPS comes from satellites, not mobile data. Once the page has loaded, the speed keeps updating even where there is no network.
Tunnels, station roofs and deep cuttings can block the GPS signal for a short time. The reading comes back once the phone sees the sky again.